Product Manual — Doc. 9132A • 40
For more information, visit Online Help (OLH) Answer ID: 1000357, Crestron Flex Teams, and
Zoom Room Systems.
Initial Setup
Connect and start the system as described in your system’s Quick Start guide. For detailed
instructions on planning, deploying, and managing the Zoom Rooms system, visit Zoom's
Documentation.
Software Updates for Zoom Rooms
Firmware updates for the UC Engine in a Zoom Rooms system are done through the UC Engine’s
Windows Update service, while Zoom Rooms software and the control devices (Crestron
Mercury devices or touch screens) receive updates from the Zoom portal.
Crestron Settings App
After setting up Zoom Rooms, use the Crestron Settings app for further configuration. A USB
keyboard and mouse are required to use the Crestron Settings app.
NOTE: If a USB port is not available, temporarily disconnect the system’s camera.
To open the Crestron Settings App:
1. Connect a USB keyboard and mouse to a USB port on the UC Engine located on the
bracket assembly.
2. Press Ctrl + Alt + Del and select Sign Out. The login screen is shown.
Login Screen
To Next Page
Loading...
Need help?
General
