Product Manual — Doc. 9132A • 62
5. Select Teams Video from the Application Mode drop-down list.
XiO Cloud, Touch Screen Device, Settings tab, Teams Video selected
6. Click Save Changes. The device will reboot.
7. If the touch screen is directly connected to the UC Engine through a PWE-4803-RU,
continue to step 10. Otherwise, log in to the touch screen’s configuration pages and
navigate to Settings > Applications.
8. Enter the following information in the appropriate fields.
o
Teams Video PC Address: Enter the IP address or hostname of the UC Engine.
o
NOTE: The hostname is printed on a label affixed to the UC Engine
(mounted on the UC bracket assembly).
o
Teams Video PC Port: By default, port number 49500 is used. If a different
port number has been configured on the UC Engine, enter that port number
instead.
o
Teams Video Username: Enter the login username for the UC Engine. (the
default is “admin”)
o
Teams Video Password: Enter the login password for the UC Engine. (the
default is “sfb”)
9. Click Save Changes. The device will reboot.
10. Configure the system as described in Configuration (on page16).
Use Custom Controls on a Zoom Rooms System
A Zoom Rooms system with a touch screen can use a touch screen project for customized room
control.
To Next Page
Loading...
Need help?
General
