Crestron PRO3 Reference Guide

Reference Guide – DOC. 7150B 3-Series Control Systems • 7
5. Enter the following search parameters for the device (required only if
multiple USB connections are active):
• Model: Enter the model name of the Crestron device (for example,
PRO3). The model is not user-defined; it is the actual model name of
the device as displayed in the System Info tool (under
Device Name in
the
Product Info section)
• Hostname: Enter the user-defined hostname, as previously assigned
in the TCP/IP settings
• Serial: Enter the serial number (not the model number or TSID) of the
Crestron device. The serial number is a seven digit number (not
beginning with 60 or 65) that may contain letters. The serial number is
printed on a sticker affixed to the device.
6. Enter the following advanced authentication parameters for the device (if
required):
• Username: Enter the username required to authenticate device
communications
• Password: Enter the password required to authenticate device
communications
7. Click OK.
The device status reports as "Connected" at the bottom of the selected tool if
communications have been established.
Text Console - Connection Status
The USB connection information for the control system may be saved using the
Address Book
function in Crestron Toolbox. For more information, refer to the
Crestron Toolbox help file.

Crestron PRO3 Specifications

General

Brand	Crestron
Model	PRO3
Category	Control Systems
Language	English