EasyManuals Logo

Crestron PRO3 Reference Guide

Crestron PRO3
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Reference Guide DOC. 7150B 3-Series Control Systems 5
Console Commands
The 3-Series processor is capable of understanding and responding to a set of
phrases known as console commands. Console commands are used to configure
the control system.
Observe the following about console commands:
Console commands can be sent to the device using an SSH client once the
IP address or hostname of the device is known. Console commands may
also be sent to the device using the Text Console tool in Crestron Toolbox
via one of the supported communication protocols.
Console commands are grouped logically. Issuing the help command
from the console responds with various command categories.
Issuing the help all command responds with a list of all exposed console
commands for the device.
The same command may be listed in more than one category. Commands
are case insensitive and can be entered from the appropriate prompt.
To view the available options and parameters for a command, issue the
command followed by a space and "?" (for example, ADDMASTER ?).
Support for new console commands is added via firmware updates. Refer
to the firmware release notes for more information.

Other manuals for Crestron PRO3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Crestron PRO3 and is the answer not in the manual?

Crestron PRO3 Specifications

General IconGeneral
BrandCrestron
ModelPRO3
CategoryControl Systems
LanguageEnglish

Related product manuals