Crestron PRO3 Reference Guide

28 • 3-Series Control Systems Reference Guide – DOC. 7150B
Firmware Updates
To take advantage of all the latest device features, the control system should
always contain the latest firmware, which is available for download at
www.crestron.com/Support
.
NOTE: Access to firmware is reserved for Authorized Crestron dealers, Crestron
Service Providers (CSPs), and Crestron partners only. New users must register
for an account to access certain areas of the Crestron website. For more
information on registering, navigate to
https://www.crestron.com/register.
To perform a firmware update:
1. Download the latest device firmware (.puf file) at
www.crestron.com/Support
.
2. Use an SFTP client to transfer the firmware .puf file to the control
system's /firmware directory.
3. Issue the PUF <filename> command in the control system console, where
<filename> is the complete filename of the .puf file.
NOTE: Firmware updates can be scheduled using the control system’s auto
update mechanism. For more information, refer to “Auto Update Mechanism” on
page
46.
The Package Update Tool in Crestron Toolbox can also be used to send firmware
to the control system and to manage the firmware update. For more
information, refer to the Crestron Toolbox help file.

Crestron PRO3 Specifications

General

Brand	Crestron
Model	PRO3
Category	Control Systems
Language	English