Crestron PRO3 Reference Guide

12 • 3-Series Control Systems Reference Guide – DOC. 7150B
Delete Local Group
To remove a local group from the control system, issue the DELETEGROUP
groupname command.
When a local user group is removed, users in the group are not removed from the
control system. However, the user will lose the access rights associated with the
removed group.
Add Active Directory Group
To add an existing Active Directory group to the control system, issue the
ADDDOMAINGROUP command.
NOTE: Use the ADLOGin command to log in to the Active Directory server.
• Syntax: ADDDOMAINGROUP -N:groupname -L:accesslevel
o -N: Specifies the name of the Active Directory group to be added
o -L: Specifies the access level for the Active Directory group
 A: Administrator
 P: Programmer
 O: Operator
 U: User
 C: Connection only
• Example: ADDDOMAINGROUP -N:ADProgs -L:P
NOTE: The control system cannot create or remove a group from the Active
Directory service, but it can grant an access level to an existing Active Directory
group.
All users of the Active Directory group inherit the access level set for the group.
Certain control system functions and console commands are accessible only to
users with corresponding access levels.
Remove Active Directory Group
To remove a local group from the control system, issue the DELETEDOMAINGROUP
groupname command.
When an Active Directory group is removed from the control system, it is not
deleted from the Active Directory service. Once the group is removed from the
control system, all members of that group lose access to the control system.

Crestron PRO3 Specifications

General

Brand	Crestron
Model	PRO3
Category	Control Systems
Language	English