86 • TS-70 Series Product Manual — Doc. 8555F
The on-screen numeric keypad opens for the chosen setting.
Edit IP Address On-Screen Numeric Keypad
l
Use the keypad to make a new entry.
l
Tap the clear button in the text field to clear any previous entry.
l
Tap the delete button to delete the last digit.
l
Tap Save to save a new entry or tap < CANCEL to discard any changes. The display
returns to the Static IP Ethernet Setup screen.
After new settings have been saved, tap APPLY CHANGES on the Static IP Ethernet Setup
screen to apply the new settings and stay in setup mode. Tap REBOOT to exit setup mode and
restart the touch screen.
Tap < BACK to return to the Ethernet Setup screen.
Tap < BACK on the Ethernet Setup screen to return to the Setup screen.
To Next Page
Loading...
