Product Manual — Doc. 8745C TSS-770 and TSS-1070 • 57
To add a new certificate:
1. Click Browse.
2. Navigate to the CA file on the host computer.
3. Select the CA file, and then click Open.
4. Click Load to load the CA file to the touch screen. The upload progress is shown in the
dialog box.
5. Once the touch screen has completed the upload, click OK.
Click the x button to close the Add Certificate dialog box at any time during the upload process.
Clicking the x button before the CA file is uploaded to the touch screen cancels the upload.
Click the x button to close the Manage Certificates dialog box and to return to the 802.1x
Authentication page.
To Next Page
Loading...
