Released on 10/31/05 - X800058A UV Pure Technologies Inc. © 2005
No part of this document may be photocopied, reproduced, transmitted, or translated to another language without the
prior written consent of UV Pure Technologies Inc.
For additional info call 1-888-407-9997 or email info@uvpure.com
or visit www.uvpure.com
31
clean water. If fouling remains, repeat procedure.
Step 9: Once the unit is clean, reassemble the unit including the motor and top
hose connection.
Step 10: Slowly open the water supply and check for leaks.
Step 11: Replace all covers and plug in the Hallett unit.
Disassembling the Unit
NOTE: This procedure is not recommended for individual household users
please contact your certified water specialist to assist should disassembly be
required.
To Next Page
Loading...