Released on 10/31/05 - X800058A UV Pure Technologies Inc. © 2005
No part of this document may be photocopied, reproduced, transmitted, or translated to another language without the
prior written consent of UV Pure Technologies Inc.
For additional info call 1-888-407-9997 or email info@uvpure.com
or visit www.uvpure.com
37
Caution: Do not operate the unit if there are any leaks at the piping connections
or within the unit.
Step 7: Reinstall the right-hand cover panel. Ensure the cover panel is
completely flat against the body of the unit before tightening the screws.
Step 8: Replace the lamps.
Step 9: Reinstall the top and bottom covers.
Step 10: Plug in the unit.
Step 11: Make an entry in the service record to establish a cleaning schedule.
To Next Page
Loading...