Page 52
P165E Radio Key # 5 Options (Default= None) 4 = Spare Page 29
P166E Radio Key # 6 Options (Default= None) 5 = Send Panic Alarm Through Dialer Page 29
P167E Radio Key # 7 Options (Default= None) 6 = Causes Immediate Panic Page 29
P168E Radio Key # 8 Options (Default= None) 7 = Causes Delayed Panic ( 1.5 Sec) Page 29
8 = Ness Battery Low
Miscellaneous Panel Options # 1
P169E Misc. Panel Options # 1 P169E Options Page 32
(Default= 3) 1 = Turn KP LED’s when Armed
2 = Keypad “Panic” Button instant or delayed
3 = Direct access to program mode for the installer code.
Miscellaneous Panel Options # 2
P170E Misc. Panel Options P170E Options Page 32
(Default= 4,7) 1 = Panel Tamper NC or EOL
2 = Installer Lockout
3 = Disable Mains Fail Test
4 = Arm only if sealed
5 = No audible keypad beep on supervised radio fault
6 = No audible keypad beep on Zone Inactivity Timeout
7 = “Control” Button Disables Day Zones
8 = Silent 24 Hour Zone (No Keypad Beep)
Keypad Partition Assignment
P171E Keypads Assigned To Partition “A” - Value Keypad 1-8 (Default= All Keypads) Page 29
P172E Keypads Assigned To Partition “B” - Value Keypad 1-8 (Default= No Keypads) Page 29
Keypads with Panic Button Enabled
P173E Keypads with Panic Button Enabled - Value Keypad 1-8 (Default= All Keypads) Page 30
Keypads Panic (1&3) or (CHIME&CONTROL) Enabled
P174E Keypads panic 1 & 3 or CHIME&CONTROL Enabled - Value Keypad 1-8 (Default= No Keypads)
Page 30
Keypad and Radio Panic Beeps to Keypad Enabled
P175E Keypad & Radio Panic Beeps to Keypad Enabled - Value Keypad 1-8 (Default= All Keypads) Page 30
Keypads Fire (4&6) or (CHIME&B) Enabled
P176E Keypads FIRE 4 & 6 or CHIME&B Enabled - Value Keypad 1-8 (Default= No Keypads) Page 30
Fire Beep to Keypad Enabled
P177E Fire Beep to Keypad Enabled - Value Keypad 1-8 (Default= No Keypads) Page 31
To Next Page
Loading...