Page 53
Keypads Medical (7&9) or (A&B) Enabled
P178E Keypads Medical 7 & 9 or A&B Function Enabled - Value Keypad 1-8 (Default= No Keypads) Page 31
Medical Beep to Keypad Enabled
P179E Medical Beep to Keypad Enabled - Value Keypad 1-8 (Default= No Keypads) Page 31
Stay Button can Disarm when in Stay Mode Enabled
P180E Stay Button can Disarm when in Stay Mode - Value Keypad 1-8 (Default 1 & 4) Page 31
**Telephone Number Reporting Options**
P181E Options for Telephone # 1 P181E-P184E Options (Default =1,2,5) Page 41
P182E Options for Telephone # 2 1 = Stop Dialing if Kissed off Page 41
P183E Options for Telephone # 3 2 = Stay Call Progress Page 41
P184E Options for Telephone # 4 3 = Blind Dial Page 41
4 = Use Group Numbers for Contact ID
5 = Send Restores
6 = Send Test Calls
7 = Spare
8 = Spare
**Dialer Programming Options**
P185E Dialer options P185E Options (Default = 1,2,7) Page 36
1 = Dialer is Enabled
2 = Fax Defeat
3 = Disable Telephone Line Monitoring
4 = DTMF or Pulse Dial (For DTMF, 4&5 must both be OFF)
5 = DTMF or Reverse Pulse Dial (For DTMF, 4&5 must both be OFF)
6 = Spare
7 = Auto Detect Modem Mode
8 = Bell 103 or V21
**Dialer Reporting Options “A”**
P186E Dialer Options “A” P186E Options (Default = 1,2,4,5,6,7,8) Page 37
1 = Report Duress Alarm
2 = Report Mains Fail
3 = Report Battery low
4 = Report Radio Battery Low
5 = Report system Tamper
6 = Report Line Fail
7 = Report Supervised Radio Alarm
8 = Report Zone Inactivity Alarm
**Dialer Reporting Options “B”**
P187E Dialer Options for “B” P187E Options (Default = 1,2,3) Page 37
1 = Report Manual Panic Alarm
2 = Report Manual Fire Alarm
3 = Report Manual Medical Alarm
To Next Page
Loading...