CSC SG250 - Front Wheel Removal

SG250 Owner’s and Service Manual
www.CSCMotorcycles.com
51
Front Wheel Removal
Support the motorcycle such that the front wheel is off the ground.
Warning! Make sure the motorcycle is adequately supported. If it is not, it could tip over, injuring you
and damaging the motorcycle.
Disconnect the speedometer cable from the speedometer
drive. In this photo, the speedometer cable has already been
disconnected.
Loosen the front axle nut and bolt.
Loosen and remove the front caliper mounting bolts, and
remove the caliper.
While supporting the front wheel, remove the front wheel axle,
and then remove the front wheel.