SG250 Owner’s and Service Manual
www.CSCMotorcycles.com
52
While removing the front wheel, remove the speedometer
wheel from the front wheel. Note that the front hub has drive
tabs to engage the speedometer drive unit.
The slots that engage the tabs on the speedometer drive unit.
Take care when reinstalling the front wheel to make sure the
tabs and the slots are properly aligned. If you do not, you may
damage the front wheel hub or the speedometer drive unit.
Slide the front wheel out of the forks.
There is a bushing between the left side of the front hub and the left fork. There is no bushing on the
right side of the motorcycle.
Front wheel installation is the reverse of front wheel removal.
Caution! Take care to align the tabs with the front hub slots when installing the front wheel.
Rear Wheel Removal
Place the motorcycle on the centerstand.