1-13
1. SAFETY PRECAUTIONS
Ex2900 / 3200 Operator's Manual
(D) CY1A8160-65310
WARNING
TO AVOID INJURY:
Before leaving or servicing machine,
●Stop engine.
●Set parking brake.
●Park on level ground.
●Lower all implements to the ground.
●Remove key.
(E) CY1A8160-65350
WARNING
TO AVOID INJURY OR DEATH FROM ROLL-
OVER:
●Keep Rollover Protective Structure (ROPS) fully
extended.
●Do not jump if machine tips.
●Use retractable seat belt.
THERE IS NO OPERATOR PROTECTION
WHEN THE ROPS IS IN THE FOLDED
POSITION.
●Fold the ROPS only when absolutely necessary.
When structure must be down:
●Do not use retractable seat belt.
●Drive with extra care.
(F) CY1A8160-65370
IMPORTANT
If diff lock does not disengage when removing foot from
pedal;
●Depress brake pedal to equalize traction.
●Then release the pedal.
(G) CY1A8160-65360
IMPORTANT
TO AVOID TRANSMISSION DAMAGE WHEN
SHIFTING:
●Completely stop the tractor using the brake pedal before
shifting.
●Do not force the range gear shift lever.
●If it is difficult to shift the lever;
1. Be sure to SET THE PARKING BRAKE before
starting the procedure.
2. Slightly depress the forward / reverse drive pedal to
rotate the gears inside of transmission.
3. Release the forward / reverse drive pedal to
NEUTRAL position.
4. Depress the clutch pedal, wait for a moment and
then shift the lever.
P3013728
(D)
(E)
P3013729
(G)
(F)
Do not force the range shift lever.
2. Slightly depress the forward / reverse drive pedal to rotate
the gears inside of transmission.
3. Release the forward / reverse drive pedal to neutral position.
1A8160-65360
To Next Page
Loading...
Need help?
General