8-5
8. OPERATING THE TRACTOR
Ex2900 / 3200 Operator's Manual
Avoid injury:
●Before starting or operating the tractor, always
check the area around the tractor for bystanders
and obstacles. Disengage the Power Take Off (PTO)
and raise the implement.
IMPORTANT: Avoid damage.
●To prevent damage to the transmission, stop the tractor
completely before shifting the range shift lever.
1. Adjust the operator's position.
■ Adjusting the Operator's Seat
1. Sit on the seat.
2. Raise the seat adjustment lever.
3. Move the seat forward and backward to find the
optimal position, and then lower the seat adjustment
lever. (The seat can be adjusted in 0.78 in. (20 mm) ×
5 steps increments.)
4. While remaining seated, confirm that various control
levers can be comfortably operated. If operation of any
control lever is not comfortable, readjust the seat
position as necessary.
(A) Seat adjustment lever
(a) Toward the front
(b) Toward the rear
(c) Loosen
(d) Lock
3. Operation of the Tractor
CAUTION
3013712a
(a)
(b)
(A)
(c)
(d)
To Next Page
Loading...
