Cub Cadet EX2900 - Stopping Travel of the Tractor; Emergency Stop Procedure

8-12
8. OPERATING THE TRACTOR
Ex2900 / 3200 Operator's Manual
Avoid injury:
●Slow down before making a turn.
1. Release the forward / reverse drive pedals.
2. Idle the engine.
3. Depress the clutch pedal to disengage the clutch and
then depress the brake pedal.
4. After the tractor has completely stopped, disengage
the Power Take Off (PTO).
5. Turn the starter key switch to the OFF position.
6. Remove the starter key switch.
IMPORTANT:
●Leave the operator's seat only after ensuring the engine and other
components have stopped rotating.
■ Emergency Stop Procedure
1. Release the forward / reverse drive pedals.
2. Disengage the clutch, and depress the brake pedal.
3. Turn the starter key switch to the OFF position.
4. Keep the brake pedal pressed until all the moving parts on the tractor
come to a full stop.
5. Engage the parking brake securely.
4. Stopping Travel of the Tractor
WARNING