Cubicon Style Plus-A15 Series - Page 18

CUBICON Style Plus-A15 Series User Manual
※ Names of Each Part inside of the Printer (Inside)
[1] Teflon Tube
A passage to supply a filament to
the extruder of the printer (Be
cautious not to be folded.)
[2] Extruder
An extruder that moves the
filament and melts it with a nozzle.
[3] Clean Filter
Case
Casing part that the clean filter is
mounted
[4] Heating Bed
A platform where the printout is
printed during printing
[5] Internal LED
Lamps
LED lamps that show the internal
condition of the printer
Since the nozzle and heating bed of the extruder part get heated to high temperature
during printing, be sure not to touch them.
18