Cubicon Style Plus-A15 Series - Page 19

CUBICON Style Plus-A15 Series User Manual
Names of Each Part of the Heating Bed (Heating Bed)
[1] Bed Power
Supply Part
A part that the
power to the bed is
supplied
[2] Bed Position
Fixing Part (3
places)
These are locations
of bolts to locate a
position of the
heating bed and fix
it: if 3 places are
unfastened during
the replacement to
a new bed, it can
be replaced.
Since the temperature of the heating bed is extremely high during printing or after printing,
be cautious about a risk of burn which can occur when it is contacted by skin.
Since high current power is applied to the heating bed, be cautious about an electric
shock when touching the bed (especially when touching the power supply module of the
bed).
19