To Next Page

To Previous Page

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

In any case, the output voltage of the controller cannot and will not

exceed the set value of this parameter.

The factory default setting of this parameter is the maximum possible

output voltage of the machine.

Variable Frequency Digital Controller

for Vibrat

ory Feeder

Saturated Accelerate

Remote

Stop

Lock

Voltage

Frequency

On Delay

Off Delay

Soft Start

SDVC311-M

5.5 Maximum Output Voltage Limit

The controller can set the maximum output voltage limit parameter h, which can

prevent the user from misoperation to output excessive voltage and damage the

vibration equipment.

Neither the panel setting voltage nor the remote control voltage will exceed this

value.

h means

Maximum output voltage limit

The maximum output voltage limit

is set to 260V

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

CUH SDVC311 Series User Manual

Questions and Answers: