CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
1 This product is only used to drive electromagnet-based vibratory
feeding equipment, do not use this product for the purpose of protecting the
human body or parts of the human body, etc.
2. This product is not intended to be used as an explosion-proof
product, do not use it in hazardous locations and/or potentially explosive gas
environment.
3. This product is powered by AC mains, please do not apply AC voltage
exceeding 260Vac. Excessive input voltage, such as 380Vac, may cause the
product to explode or catch fire, resulting in serious safety accidents.
4. This product is grounded through the power cord. Please ensure that
the power distribution facilities for the controller are well grounded, otherwise
the controller shell may be charged, resulting in an electric shock accident.
5. Do not input AC power to the output of this controller, it will damage
the controller.
6. Do not plug and unplug the wiring with points or touch the contact
of each wiring terminal in the wiring compartment to prevent electric shock.
7. Please avoid controlling the output of this product by cutting off the
power supply through relays and other devices, which will seriously reduce the
life of the controller.
8. The controller is designed to work in a cool and dry environment.
Never run the controller outside to avoid soaking and insolation. Operate the
controller within the temperature specified electrical characteristic.
9. Be sure to fix this product on a solid platform that is reliably
grounded and away from vibrating equipment.
10. Never operate the controller under the condition that beyond its
designed limits.
11. Operate the controller in accordance with this instruction book
strictly. we will not assume any civil or criminal liability if the equipment
damage or personal injury is caused by incorrect operation.
12. Never open the controller shell to avoid electric shock. Contact
CUH if the controller break down. Never try to repair the controller yourself
which may caused void warranty.
.
Danger
Danger
Warn
Warn
Warn
Warn
Notice
Notice
Essential
！
Essential
！
Essential
！
Essential
！
Safety and Precautions
SDVC311 Series
Variable Frequency Digital Controller for Vibratory Feeder
SDVC311SMSEN_1.032023-08
To Next Page
Loading...
Need help?
General
