12 Culligan® Series G1 Reverse Osmosis
12 Cat. No. 01021713
Product Water Connections
The product water exits the unit at the product flow meter on the back side of the unit. Connect the product tubing to the
fitting on the flow meter assembly. The product water flow meter contains a nozzle that is used with all models EXCEPT
G1-1F and G1-2F.
CAUTION! This unit produces high quality product water. This water can be contaminated by
plumbing following the unit or it can corrode the plumbing. Use only plumbing compo-
nents of inert material that are compatible with the application.
The connection of the main product tubing to service plumbing will depend on how the product water will be stored.
CAUTION! Reverse osmosis elements will fail immediately if pressurized product water is allowed
to flow backward into the Series G1 unit.
To Next Page
Loading...
Need help?
General
