Culligan G1 Series User Manual

64 Culligan® Series G1 Reverse Osmosis
64 Cat. No. 01021713
Diagnostics
RUNNING
JAN-01-12 12:01P
1. From the default home screen, press . The screen displays the main menu.
1) GO TO RUNNING
2) GO TO OFFLINE
3) INFORMATION
>4) SETUP
2. Press to scroll to 4) SETUP.
3. Press to select the SETUP menu.
3) POWERON MODE
4) FLUSH MODES
5) ACCESSORIES
>6) DIAGNOSTICS
4. Press to select 6)DIAGNOSTICS. The screen displays the
diagnostics menu.
>1) TST WIRELESS
2) TESTPHONELIN
3) USE DATA PORT
4) TEST APP
5. The screen displays the diagnostics menu.
Test Wireless Remote
>1) TST WIRELESS
2) TESTPHONELIN
3) USE DATA PORT
4) TEST APP
6. Press to select 1)TST WIRELESS. The screen displays the wireless test
screen.
WIRELESS TEST
0 / 188
RSSI=5
7. The screen displays the test number and total number of attempts and the re-
ceived signal strength indicator (RSSI). The system will continue to test the signal
strength until you press any button to return to the diagnostics menu.
The signal strength indicator (RSSI) will show a value of between 0 and 8. If the
RSSI is at least 4, then the installation is complete. It the SSI drops below 4, then
it may be necessary to select an alternate location for the wireless remote.
Test Phone Line
1) TST WIRELESS
>2) TESTPHONELIN
3) USE DATA PORT
4) TEST APP
8. Press to select 2)TESTPHONELIN. The screen displays the modem test
screen.
MODEM TEST
Emailing now
Please Wait ...
9. Press to begin testing the modem telephone line. The screen displays the
status of the test before displaying the results. Do not press any buttons before the
test is complete or the controller will return to the Diagnostics menu.

Culligan G1 Series Specifications

General

Brand	Culligan
Model	G1 Series
Category	Water Filtration Systems
Language	English