Accessories 43
Cat. No. 01021713
GBE-Wireless Communication Setup
Now set up the RO controller to communicate with the wireless remote.
RUNNING
JAN-01-12 12:01P
1. From the default home screen, press . The screen displays the main menu.
1) GO TO RUNNING
2) GO TO OFFLINE
3) INFORMATION
>4) SETUP
2. Press to scroll to 4) SETUP.
3. Press
to select the SETUP menu.
2) LANGUAGE
3) POWERON MODE
4) FLUSH MODES
>5) ACCESSORIES
4. Press to select 5)ACCESSORIES. The screen displays the ac-
cessories menu.
>1) WIRELESS REM
2) MODEM
3) FLOW METERS
4) SWITCH INPTS
5. Press to select 5)ACCESSORIES. The screen displays the ac-
cessories menu.
REMOTE DISPLAY
NOT INSTALLED
6. Press or and then to change the state to INSTALLED.
CHANNEL #
>1
7. Press or and then to select the channel number of the control valve.
The CHANNEL # for the RO controller must be the same as the CHANNEL # for
the Remote Display.
RF FREQUENCY
915 Mhz
8. Use this setting to select the correct radio frequency. Do not change the RF fre-
quency for North America installations..
RUNNING
JAN-01-12 12:01P
9. Press to save the settings and return to the home screen.
To Next Page
Loading...
Need help?
General
