G1 RO Features 3
Cat. No. 01021713
Flush Options
The system offers six different membrane flush modes to improve performance and extend membrane life.
NOTE Quality Flush and Permeate Flush are mutually exclusive optional features.
Target TDS
The RO system keeps track of the average product water TDS whenever the RO system is operating, mixing lower quality
water with product water to meet the average product water TDS.
Communications via Modem
An optional modem and monitoring service can be used to remotely monitor the RO performance over time. This service
can also be used to alert the customer and the Culligan dealer in the event that an alarm or error condition occurs.
Wireless Remote Communication
An optional wireless remote can display the current operational status and performance statistics up to 200 feet from the
G1 RO system.
PLC Outputs Available
The GBE Controller collects data once per minute and then streams the data to a customer-owned PLC for data collection
or monitoring. Customer would have to write code to take text information and convert the data for their data collection
system. For more information, see Culligan P/N 01021512 Advanced Communication Manual.
This data, once converted from a text stream, can easily be imported to an excel spreadsheet and the data logged can
then be graphed and trended.
To Next Page
Loading...
Need help?
General
