First Time Setup Process 24
23 CULLIGAN GLOBAL ELECTRONIC CONTROLLER
• The “>” symbol indicates that this value may be changed by pressing the
UP and DOWN arrow buttons. For example, pressing the DOWN arrow
while the “>” mark is displayed changes the display from “JAN” to “FEB”.
• Once the desired value is displayed accept the value by pressing the “CHECK MARK” button.
Press the DOWN arrow to accept that value and move to the next question.
4. Set Day
Set Day
1
• If the value displayed is NOT correct, pressing the “CHECK MARK” button will change the display, to show
a “>” symbol next to the displayed value. Use the UP or DOWN arrow to change the setting. Once the
desired value is displayed, this value can be accepted by pressing the “CHECK MARK” button.
Press the DOWN arrow to accept that value and move to the next question.
5. Set Year
Set Year
2008
• If the value displayed is NOT correct, pressing the “CHECK MARK” button will change the display, to show
a “>” symbol next to the displayed value. Use the UP or DOWN arrow to change the setting. Once the
desired value is displayed, this value can be accepted by pressing the “CHECK MARK” button.
Press the DOWN arrow to accept that value and move to the next question.
6. Set 12 Hour or 24 Hour Clock
12 hr or 24 hr clock
12
• If the value displayed is NOT correct, pressing the “CHECK MARK” button will change the display, to show
a “>” symbol next to the displayed value. Use the UP or DOWN arrow to change the setting. Once the
desired value is displayed, this value can be accepted by pressing the “CHECK MARK” button.
Press the DOWN arrow to accept that value and move to the next question.
First Time Setup Process
Set Month
> FEB
To Next Page
Loading...
