Cupra FORMENTOR - Setting the Indications and Audio Signals; Trailer Mode; Visual Indication Segments

Help with parking and manoeuvring
Visual indication segments
Fig. 181
Parking aid view on the Infotainment sys-
tem display.
The optical indication of the segments works
as f
ollo
ws:
grey segments: the obstacle is more
than approx. 30 cm away from the path
or in the direction opposite to travel.
They are also displayed when the elec-
tronic parking brake is activated.
Yellow segments: the obstacles lie on
the vehicle’s path and are at a distance
of less than approx. 30 cm away.
Red segments: obstacles are less than
approx. 30 cm away.
A wake will indicate the anticipated forward
or backward trajectory, depending on the
engaged gear.
–
–
–
If an obstacle is located in the vehicle’s way,
the corresponding audible warning will
sound.
When the penultimate segment is displayed,
the vehicle has reached the collision zone. In
the collision zone, the obstacles are repre-
sented in red (including those out of the
path). Stop the vehicle!
›››
in Introduction
on pag
e 278
,
›››
in Introduction on
pag
e 278
!
Setting the indications and audio sig-
nals
The indications and acoustic signals are set
in the Inf
ot
ainment system: function button
 > Assistants > Parking aid:
Settings
Automatic activa-
tion
On/off
Front volume*
Volume in the front and rear
area.
Rear volume* Volume in the rear area.
Adjust volume
When the parking aid is
switched on, the volume of
the audio source will be re-
duced, depending on the se-
lected option.
Error messages
If a an error or fault message appears on the
instrument cluster in P
ark Assist, there is a
fault.
If the fault doesn't disappear before discon-
necting the ignition, it will not be indicated
next time the parking aid is connected.
If a rear sensor is faulty, only the obstacles in
the areas
A
and
B
are displayed
››
›
Fig. 180. If a front sensor is faulty, only the
obstacles in the areas
C
and
D
will be dis-
pla
y
ed. Symbol  is displayed.
We recommend taking the vehicle to a spe-
cialised workshop to have the fault repaired.
Trailer mode
On vehicles with a factory-mounted trailer
hook, when the tr
ailer is connect
ed, the rear
sensors will not activate when reverse gear is
engaged or button  is pressed in the Info-
tainment system ( > Assistants > Parking
aid). Therefore, any objects behind or to the
side of the vehicle will not be indicated on
the screen and no audio signals will sound.
The screen will only display objects detected
at the front, and the vehicle's trajectory will
be hidden.
281