Currie tech Izip E3 Path - Service Checklist and Tools; Regular Service Checklist; Required Tools for Service

88
89
Tools Required
1. Open ended wrench or ring wrenches: 8mm,
9mm,10mm,12mm,13mm,14mm,15mm
2. Open end or pedal wrench 15mm
3. Allenkeywrenches:2.5mm,3mm,4mm,
5mm, 6mm, 8mm
4. Adjustablewrench
5. Standard flat head screwdriver
6. Standard Phillips head screwdriver
7. Standard slip joint pliers
8. Tire pump
9. Tube repair kit
10. Tire levers
Travel Tools
1. Spare Tube
2. Patch kit
3. Pump
4. Tirelevers
5. Multi-tool
6. Change (phone call)
Schedule 2 - Service Checklist
Frequency Task Page Reference
Before every ride Be sure batteries are fully charged 44-48
Check tire pressure 91-93,120-121
Check brake operation 72-81, 116-117
Check wheels for loose spokes 90
Perform safety check 20-21
After every ride Be sure to fully charge batteries 45-48
Quick wipe down with damp cloth
Weekly Lubrication as per schedule 1 87
Monthly Inspect wires
Inspect connectors
Lubrication as per schedule 1 87
Check derailleur adjustment 81-83
Check brake adjustment 72-81
Check brake and gear cable adjustment 97
Check tire wear and pressure 91-93,120-121
Check wheels are true and spokes tight 70
Check hub, head set and crank bearings for looseness 93,98,103-105
Check pedals are tight 101
Check handlebars and stem are tight 94-95
Check seat and seat post are tight and comfortably adjusted 64-65
Check frame and fork for trueness
Perform safety check 20-21
Every Six Months Lubrication as per schedule 1 87
Frequency Task Page Reference
Check all points as per monthly service 87
Check and replace brake pads, if required 74-81
Check chain for excess play or wear 106-107
Yearly Lubrication as per schedule 1 87
Carry these items with you on every ride, in case
you experience mechanical difficulties