Currys Essentials C16LDVB11 - Selecting the Input Source; Channel Selection; Display Channel Information; Volume Adjustment

17
GB
Initial Setup
Selecting the Input Source
1. Press the button on the right side panel of the TV or on the
remote control to display the Input source list.
2. Press the
buttons to select the input source that you want: DTV / ATV /
SCART / YPbPr / PC / HDMI1 / HDMI2 / AV / DVD / DMP.
3. Press the OK button to confirm your selection.
Input Source
OK
DTV
ATV
SCART
YPbPr
PC
HDMI1
HDMI2
AV
DVD
DMP
Channel Selection
• Press the CH + / – buttons on the remote control repeatedly or the 0-9 buttons to select the channel.
Alternative
Press the OK button to enter the Channel List. Then use the buttons to highlight and select the channel.
Press the OK button to view the selected channel.
If a blocked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the
password, the channel will then be unlocked (refer to page 20-21 for details on Channel Edit).
• Press the FAV button to view the Favourite List. Then use the
buttons to highlight and select the channel. Press the OK
button to view the selected channel (refer to page 20-21 for details on Channel Edit).
• Press the RECALL button to return to the previously viewed channel.
Display Channel Information
• Press the INFO button to view the current information.
Volume Adjustment
• Press the VOL + or – button on the side panel of the TV or on the remote control to adjust the volume.
• If you wish to switch the sound off, press the MUTE button. Press the MUTE button again or the VOL + button to resume
audio listening.
Optimum Viewing
The diagrams below demonstrate the optimum viewing angles for this TV.
Side View Top View
35°
15°
45°
45°
C16LDVB11_IB_110404_Annie.indd 17 11年4月4日 下午6:04