Curtis 1353 - Monitor Menus; Table 7 Monitor Menus: 1313;1314 Programmer

7 — SERIAL COMMUNICATIONS& PROGRAMMING
pg. 45
Return to TOC Curtis 1353 CANopen Expansion Module Manual – June 2017
Table 7 Monitor Menus: 1313/1314 Programmer
ANALOG INPUT.............................. p. 46
— Analog1
— Voltage
— Resistance
— Virtual Digital
— Analog2 (same)
— Analog3 (same)
— Analog4 (same)
— Analog5 (same)
— Analog6 (same)
DRIVER OUTPUT............................ p. 46
— Driver1
— Current
— PWM
— Driver2 (same)
. . .
— Driver9 (same)
— Total Current
DIGITAL INPUT............................... p. 46
— Input1
. . .
— Input9
ENCODER INPUT........................... p. 46
— Encoder1
— Pulse Counts
— RPM
— Position
— Encoder2 (same)
POWER SUPPLY OUTPUT............... p. 47
— 5V
— 12V
— EXT Current
HOUR METER.............................. p. 47
— Hours
— Minutes
MONITOR MENUS
Through its monitor menus, the Curtis programmer provides access to real-time data during vehicle
operation. is information is helpful during diagnostics and troubleshooting, and also while adjusting
programmable parameters.
e monitored variables are arranged in hierarchical menus, as shown in Table 7.
TEMPERATURE............................ p. 47
BATTERY VOLTAGE........................ p. 47