Need help?Do you have a question about the Custom Audio Electronics K-80 and is the answer not in the manual?
General| Brand | Custom Audio Electronics |
|---|---|
| Model | K-80 |
| Category | Label Maker |
| Language | English |
Outlines the chapters and their content within the manual.
Explains symbols like NOTE, ATTENTION, DANGER for safety and usage.
Lists components included in the device packaging.
Details external parts of Model A with labels and diagrams.
Explains the information found on the product label (PC, SN, HW).
Describes how to operate the device using buttons during power up.
Explains button functions when the device is in standby mode.
Details the meaning of status LED signals and corresponding device states.
Instructions and dimensions for physically mounting the device.
Illustrates how to connect power, USB, and serial cables.
Details the pin assignments for power, USB, and RS232 interfaces.
Information on obtaining and installing device drivers for Windows and Linux.
Step-by-step guide to powering up the printer.
How to set the paper width for 76mm or 80mm rolls.
Procedure for inserting and loading a paper roll.
Explains how the anti-jamming feature works.
Describes the function of the shutter for preventing object introduction.
How to enter configuration mode and print a setup report.
Explains the contents of the setup report and device parameters.
Details how device operating status is indicated in the configuration print-out.
Lists and describes configurable printer parameters (RS232, USB, etc.).
Explains the function for diagnosing received characters via communication port.
Step-by-step guide to clearing a paper jam.
Recommended schedule for cleaning device components.
Detailed instructions for cleaning rollers, cutter, and other parts.
Instructions for updating the device firmware via serial or USB interface.
Lists general, interface, and memory specifications for the device.
Details character density, columns, speed, and size.
Provides physical dimensions and weight for Model A and Model B.
Shows dimensions of the optional power supply unit.
Details paper requirements for the black mark sensor kit.
Lists available character coding tables for the device.
Specifies thermal paper roll dimensions and code.
Lists the optional power supply and its reference.
Details the adapter cable for the power supply.
Lists various sensor kits including Black Mark, Low Paper, and Ticket Out.
Describes the paper guide kit for 76mm width.
Provides instructions for connecting the adapter cable to the power supply.
How to enable the alignment feature with sensor mounting positions.
Explains the automatic sensor calibration process and its results.
Defines alignment point and black mark distance parameters.
Importance of calibrating printing area length based on inter-black mark distance.
Lists data needed for technical support and how to submit it.
To Next Page
