6.2 Planning of cleaning operations
The regular cleaning of the device keeps the print quality and extends its life. The following table shows the recommended
planning for the cleaning operations.
EVERY PAPER CHANGE
Rollers Use isopropyl alcohol
EVERY 5 PAPER CHANGES
Paper path Use compressed air or tweezers
Cutter Use compressed air
Sensors Use compressed air
Ejector Use compressed air
EVERY 6 MONTHS OR AS NEEDED
Case Use compressed air or a soft cloth
NOTES:
If you use the device in dusty environments, you must reduce the intervals between the cleaning operations.
41
To Next Page
Loading...