Paper end Not attached to roll core
Core type Cardboard or plastic
CUTTER
Paper cut Total or partial
Estimated life
(2)
1 000 000 cutter number
DEVICE ELECTRICAL SPECIFICATIONS
Power supply 24 Vdc ±10% (optional external power supply)
Medium consumption
(6)
2.2 A
Typical consumption
(4)
0.8 A
Stand-by consumption 0.04 A
ELECTRICAL SPECIFICATIONS POWER SUPPLY cod.963GE020000003 (OPTIONAL)
Power supply voltage from 100 Vac to 240 Vac
Frequency from 50 Hz to 60 Hz
Current (output) 2.5 A
Power 60 W
ENVIRONMENTAL CONDITIONS
Operating temperature from 0°C to +50°C
Relative humidity from 10% Rh to 85% Rh
Storage temperature from -40 °C to +70 °C
Storage relative humidity from 10% Rh to 90% Rh
NOTES:
(1) : Control board.
(2) : Respecting the regular schedule of cleaning for the device components.
(3) : Damages caused by scratches, ESD and electromigration are excluded.
(4) : Referred to a standard CUSTOM receipt (L=10cm, Density = 12,5% dots on).
(5) : For external rolls diameter higher to Ø100mm it’s recommended to use a paper pretensioning device.
(6) : Referred to the UL measurements (Print density = +50%, Ticket = 50% dot on, 1 ticket every 30s).
49
To Next Page
Loading...
Need help?
General
