Custom Audio Electronics KPM 216 H - Page 28

1. INSTALLATION AND USE
KPM216H
141-
1
2
Clean the heating line (black line
indicated by the arrow)
1
2) Clean the printing head heating line (1) using a non-abrasive cloth moistened with
denatured alcohol (see fig. 1.21)
3) Lower the cover (1) to close and pressing (2) in the exact point indicated from the label
located on the cover as shown in the fig. 1.22 and 1.23.
(Fig.1.21)
(Fig.1.22)
(Fig.1.23)