Custom Audio Electronics TK180 User Manual

Printing head
1
Disconnect the power supply cable and
open the device cover (see par.4.1).
2
Clean the printing head by using
a non-abrasive cloth moistened with isopropyl.
ISOPROPYL ALCOHOL
ATTENTION:
Do not use solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
ON
Printing roller
1
Disconnect the power supply cable and
open the device cover (see par.4.1).
2
Clean the printing roller by using
a non-abrasive cloth moistened with isopropyl.
ATTENTION:
Do not use solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
ON
ISOPROPYL ALCOHOL
74

Custom Audio Electronics TK180 Specifications

General

Brand	Custom Audio Electronics
Model	TK180
Category	Printer
Language	English