7. To allow the user full admin privileges, navigate to Administrator [ ]
and press Enter. An x appears indicating the option is active. Press
Enter again to remove the x and deny the user full admin privileges.
8. To select which outlets a normal user has control of, navigate to one of
the eight outlets that appear under User can modify these outlets
(Administrators can modify ALL outlets): and press Enter. An x
appears indicating the user has control over that outlet. Press Enter
again to remove the x and deny the user access to that outlet.
9. Repeat step 8 to set/unset any remaining outlets the user can control.
10. Once all settings and options have been set, navigate to [SAVE USER]
and press Enter to save the user profile.
11. When done, hit Backspace to return to the System Settings screen.
To Next Page