Firewall
129
By default, the web management console runs on the default HTTP port (i.e. 80).
After changing the web server port number, you must include the new port number in the
URL to access the pages. For example, if you change the web administration to port
number 88, the URL to access the web administration is similar to: http://192.168.0.1:88
SSL/HTTPS (Secure HTTP)
Note
Not available on the SG300, SG530, SG570 or SG630.
To enable SSL support on the CyberGuard, an RSA x509 certificate as well as its private
key are required. These may be uploaded to the CyberGuard SG appliance, or you may
choose to have the CyberGuard SG appliance create a self-signed certificate.
Once valid SSL certificates have been uploaded or created, A valid SSL certificate has
been installed is displayed. The CyberGuard SG administrative web server can then
operate in one of one of 3 modes:
• Both Normal (HTTP) and SSL (HTTPS) web server access
• Disable SSL (HTTPS) web server access (HTTP only)
• Disable normal (HTTP) web server access (HTTPS only)
To access the web management console securely using SSL encryption, the URL
becomes https:// instead of http:// (e.g. https://10.0.0.1).
To Next Page
Loading...
Need help?
General
