Getting Started
41
From a network security standpoint, it may be desirable to disable the Reset switch after
initial setup has been performed. This is accomplished by removing the jumper linking
CON2 on the CyberGuard SG appliance. This jumper is labeled Remove Link to Disable
Erase.
The CyberGuard SG Management Console
The various features of your CyberGuard SG appliance are configured and monitored
using the management console. Follow the steps from the beginning of this chapter to
set up your PC to access the management console.
The main menu is displayed on the left hand side. Navigate your way around and get a
feel for the CyberGuard SG appliance’s features by clicking the corresponding link in the
main menu.
The remainder of this user manual is roughly divided into
chapters based on the main menu section heading, e.g.
Network Setup, Firewall, etc. Chapter sections roughly
correspond to the menu items under each heading, e.g. DHCP
Server, Web Cache.
Help
To access help for the current page, click the blue help icon on the top right hand side of
the.screen.
Each field is described, along with acceptable input values where appropriate. To search
the entire contents of the help system, enter search Keywords and click Search.
To Next Page
Loading...
Need help?
General
