Getting Started
40
Enter the following details:
IP address is the second free IP addresses that is part of the subnet range of your
LAN.
Subnet mask is the subnet mask of your LAN.
Default gateway is the IP address of your LAN’s default gateway.
Preferred DNS server is the IP address of the DNS server used by PCs on your
LAN.
Click OK.
Attach your CyberGuard SG appliance’s Ethernet port to your LAN’s hub.
Quick setup is now complete.
Disabling the reset button on your CyberGuard SG PCI appliance
For convenience, the CyberGuard SG appliance ships with the rear panel Reset button
enabled. This allows the CyberGuard SG appliance’s configuration to be reset to factory
defaults.
To Next Page
Loading...
Need help?
General
