CyberGuard sg565 User Manual

USB
234
Command (m for help): p
Disk /dev/sda: 5 heads, 50 sectors, 1024 cylinders
Units = cylinders of 250 * 512 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 1024 127975 b Win95 FAT32
Delete any existing partitions by typing d the entering the partition number, e.g. enter 1 to
delete /dev/sda1.
Create a new partition by typing n then p for primary, then the partition number.
Note
The CyberGuard SG appliance support primary partitions only, so you are limited to four
partitions.
Enter the cylinder for the partition to start on, generally the default is fine. Enter the
cylinder for the partition to end on, or a size for the partition with +(size in mb)M.
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1024, default 1):
Using default value 1

CyberGuard sg565 Specifications

General

Brand	CyberGuard
Model	sg565
Category	Firewall
Language	English