Network Setup
66
Ping Interval is the time to wait in between sending each ping, Failed Pings is the
number of missed ping replies before this connection attempt is deemed to have
failed.
Click Finish.
Modify failover levels (primary, secondary, tertiary)
The second and final step of configured Internet failover is associating Internet
connections with and primary, secondary and optionally tertiary connection levels.
Recall that a connection level is one or more connections. These connections may be
marked as Required or Enabled. Internet connections that are marked Disabled are not
part of this connection level. A connection level is deemed to be up when all connections
marked Required at that level are up, and at least one connection (marked Required or
Enabled) at that level is up.
On the Network Setup page, click the Failover & H/A tab, then Modify Levels. A table
is displayed listing each of the connections alongside a drop down box for each
connection level.
Note
If a connection is marked <Always Up>, you must edit its connection parameters as
described by the previous section before it can be associated with a connection level.
To Next Page
Loading...
Need help?
General
