Cybernet IPC-R1ix - Page 76

70
BIOS AND DRIVER SETTING
4.3.4
Phoenix SecureCore(tm) Setup Utility
Main Advanced Chipset Boot Security Save & Exit
Item Specific Help
SATA Controller(s)
[Enabled]
SATA Model Selection [IDE]
Serial ATA Port 0 Empty
Serial ATA Port 1 WDC WD320
Serial ATA Port 2 Empty
Serial ATA Port 3 Empty
Serial ATA Port 4 Empty
Serial ATA Port 5 Empty
SATA Controller(s) :
0988261051
Enables or Disables integrate SATA controller for Storage device use.
SATA Mode Selection :
Determines how the SATA transfer mode for operate. Here have three option
for choice [IDE] / [AHCI] / [RAID]. For the RAID mode operate, please see
appendix E. for detail information.
Serial Port 0~5 :
This system offers six SATA port for connection SATA device.