83
Appendix C
C
APPENDIX C : RAID INSTALLATION GUIDE
Valuable digital memories are protected against a hard drive failure when the
system is configured for any one of three fault-tolerant RAID levels: RAID 0,
RAID 1, RAID 5 or RAID 10. By seamlessly storing copies of data on one or
more additional hard drives, any hard drive can fail without data loss or system
downtime. When the failed drive is removed and a replacement hard drive is
installed, data fault tolerance is easily restored.
A. SATA Mode for RAID
Please select SATA Device to RAID mode on BIOS menu.
To Next Page
Loading...
