84
Appendix C
B. Install O.S.
IPC-R1ix is equipped with 6 SATA ports, include 3 internal SATA ports,
2 mSATA ports and 1 CFAST port. You can select one of SATA port for OS
installation. We use CFAST card for Windows 7 OS installation as an example.
For WinXP installation, you should press “F6” while the installation
program starting for ‘RAID’ driver installation. And the best solution that
show as item 3. ACHI operate.
C. Install All Device Drivers
Please follow installation sequences:
1.To install chipset driver
2.To install network driver
3.To install ME driver ( if available)
4.To install audio driver
5.To install VGA driver
D. Install Intel Rapid Storage Tech. Software
You can get the software on IPC-R1ix driver CD.
http://www.intel.com/p/en_US/support/highlights/chpsts/imsm
The RAID environment has been done if you completed the steps above.
E. Insert SATA HDD for RAID 1
Please notice, you can use 5 SATA ports for SATA HDD, except the CFAST port.
F. Enable Hot Plug Function
Please enable ‘Hot Plug’ for HardDisk or RAID volume
To Next Page
Loading...
