73
BIOS AND DRIVER SETTING
4.3.7
Serial Port :
Enable or Disable Serial Port.
Device Setting :
Current IO addresses and interrupts resource of Serial Port.
Change Settings :
Select another device setting .
Here have 4 option :
IO=3F8h; IRQ=4;
IO=2F8h; IRQ=3;
IO=3E8h; IRQ=10;
IO=2E8h; IRQ=11;
Interface Mode:
Here have 4 option :
RS-232 Mode
RS-422 Mode
RS-485 Mode
Figure 4-3-7 : Serial Port 2 Setup screen
2
Phoenix SecureCore(tm) Setup Utility
Main Advanced Chipset Boot Security Save & Exit
Item Specific Help
Serial Port 1 Configuration
Serial Port [Enabled]
Device Settings IO=2F8h; IRQ=3;
Change Settings [IO=2F8h; IRQ=3;]
Interface Mode [RS-232 Mode]
To Next Page
Loading...
