Cybernet IPC-R1ix - J. Recovery & Auto Re-Build When Use the SAME RAID HDD; K. Recovery & Auto Re-Build When Use the DIFFERENT RAID HDD

87
Appendix C
J. Recovery & Auto Re-Build When Use the SAME
RAID HDD
*
If more help is needed, please contact Cybernet Technical Support
K. Recovery & Auto Re-Build When Use the
DIFFERENT RAID HDD
There is a warning will pop-up to ask you if the disk is not a member of original
RAID volume. If you press ‘Rebuild’, it will replace the broken SATA HDD to the
last one SATA HDD of RAID volume.