CYBEX 525T Service Manual

2. Unplug the treadmill from the power outlet.
Shock and electrocution hazard.
• Unplug unit and let sit 10 minutes before cleaning or performing
maintenance.
• Electrical charge can remain in unit after unplugging.
• Keep water and liquids away from electrical parts.
Remove power cord
1. Remove the mounting screw securing the mounting bracket in place using a Phillips screwdriver.
Qty.DescriptionItem
1Power Cord1
1Power Cord Inlet2
1Mounting Bracket3
1Mounting Screw4
2. Unplug the power cord from the power cord inlet.
Power cord may be routed through frame. See Owner’s manual.
Install power cord
1. Plug the power cord into the power cord inlet.
Qty.DescriptionItem
1Power Cord1
1Power Cord Inlet2
1Mounting Bracket3
1Mounting Screw4
2. Install the power cord with the mounting screw and mounting bracket using a Phillips screwdriver.
Complete installation
1. Plug the power cord into the power outlet.
2. Verify the power cord is not being pinched under the front of the treadmill.
3. Operate the unit at all levels to verify proper operation.
Page 164 of 199
Cybex 525T Treadmill Part Number

CYBEX 525T Specifications

General

Brand	CYBEX
Model	525T
Category	Treadmill
Language	English