CYBEX 770T - Page 206

Remove fan
1. Unplug the fan cable by un-latching connector (J19) from the MCC board.
Qty.DescriptionItem
1Fan Cable1
1MCC Board2
1J193
1Fan4
2. Remove the six screws securing the fan and duct to the console assembly using a Phillips screwdriver.
Qty.DescriptionItem
1Console Assembly1
1Louver2
1Duct3
6Screw4
1Fan5
The louver is held in place by the duct.
Remove E3 View Monitor
1. Unplug IR receiver cable from E3 View Monitor.
Page 206 of 261
Cybex 770T/790T Treadmill Part Number