CYBEX 770T - Page 219

Remove headphone jack
1. Remove two screws securing headphone jack cover to handset using a Phillips screwdriver.
Qty.DescriptionItem
1J61
1Headphone jack cable2
1Headphone jack cover3
2Screw4
1Handset5
2. Unplug headphone jack cable from connector J6 on MCC board (connector on right).
Pull connector straight out, cable uses a 90 degree connector.
3. Unscrew headphone jack cable from headphone jack cover by unscrewing cable.
Qty.DescriptionItem
1Headphone Jack Cover1
1Nut2
1Headphone Jack Cable3
4. Remove nut from front of headphone jack cover.
Install headphone jack
1. Install the nut into the front of the headphone jack cover.
Qty.DescriptionItem
1Headphone Jack Cover1
1Nut2
1Headphone Jack Cable3
Page 219 of 261
Cybex 770T/790T Treadmill Part Number