CYBEX 770T - Page 246

2. Install the four screws securing the MCC board to the console using a Phillips screwdriver.
Qty.DescriptionItem
1MCC Board1
4Screw2
1Console3
3. Plug the following cables into the MCC board; display (J16), console (J15), CSAFE (J18) and radio
(J14).
Qty.DescriptionItem
1Display (J16)1
1Console (J15)2
1Wing Nut3
1Ground Connector4
1CSAFE (J18)5
1Audio, gray (J14) Optional6
Page 246 of 261
Cybex 770T/790T Treadmill Part Number